-40%
NETest Remote network Cable Tester
NETest Remote network Cable Tester
NETest Remote network Cable Tester
NETest Remote network Cable Tester
NETest Remote network Cable Tester
NETest Remote network Cable Tester
NETest Remote network Cable Tester
NETest Remote network Cable Tester
NETest Remote network Cable Tester
NETest Remote network Cable Tester
NETest Remote network Cable Tester

NETest Remote network Cable Tester

$ 13.91

Availability: 100 in stock
  • Country/Region of Manufacture: Taiwan
  • UPC: 9869856
  • MPN: Does Not Apply
  • All returns accepted: Returns Accepted
  • Custom Bundle: No
  • Modified Item: No
  • Refund will be given as: Money Back
  • Connectors: Coaxial BNC
  • Connectivity: Coaxial BNC
  • Condition: The NETest Network cable tester is a simple but comprehensive cable tester that will diagnose wiring faults for 10 BASE2 (Coax), 10 BASE–T, 100 BASE–Tx, TIA–586A, TIA–568B & Token Ring cables. It will not only identify wiring faults such as open wires, shorts, reversed pairs, crossed pairs, split and mis–wiring, but also will identify up to 4 different cables frome the tested end. With a push of a button, the NETest will automatically scan all wires and pairs to determine any existing faults. A large alphanumeric LED displays the fault code; while a series of smaller LEDs indicate which pair the fault is existent on. For testing of installed cables, 4 remote terminators are provided. The terminators are also used to identify which cable is being tested.
  • California Prop 65 Warning: None
  • Type: Computer Cable Tester
  • Model: 256450
  • Item must be returned within: 60 Days
  • Restocking Fee: No
  • Connectors Supported: Bnc Jack Rj45
  • Brand: NETest
  • Return shipping will be paid by: Seller

    Description

    NETest Remote network. This item is an open doesn’t show sign of use. Please look at the pictures thank you
    Model No.: 256450
    Display : LED bar
    Testing main unit interface: RJ-45 x1, BNC x 1
    Remote unit interface: RJ-45+BNC
    Office ID: Yes
    ID #: 4
    Remote test: results display on the master unit
    Buzzer warning: no
    Faults display: alphanumeric LED faults display
    Faults detection: open, short, reversed, cross, split
    Tone generator: no
    Patch panel organizer: no
    Portfinder : no
    Mass cables test: no
    Low battery indicator: Yes
    • Split tests cable length: Min. 1.2M (about 4 ft.) Max. 150M (about 492 ft.)
    • Can identify the following faults: open, short, crossed, reversed, and split
    • Can identify up to 4 different cables on the other end by using 4 provided remote identifiers
    • Simple and effective use
    • A large display LED and 4 wire LEDs clearly display the fault status
    • Designed with one 9V DC battery for longer operation and easy replacement