-40%
TIGERHAWK 2014, RECTANGULAR 1-1/2 HP

TIGERHAWK 2014, RECTANGULAR 1-1/2 HP

$ 633.59

Availability: 100 in stock
  • Cord Length: 41-50 ft
  • Equipment Type: Multi-Purpose
  • Brush & Pad Type: 14x20 rectangular pads
  • Brush & Pad Speed: 100-400 rpm
  • Condition: Used a couple times as a demo unit, nearly new.
  • Horsepower: 1.5-2 hp
  • Application: Multi-Purpose
  • Voltage: 115 V
  • All returns accepted: ReturnsNotAccepted
  • MPN: FTIGER2014DEMO
  • Noise Level: 61-65 dB
  • Features: Adjustable Handle
  • Brand: HAWK Floorcare

    Description

    TigerHawk2014 Square Strip Scrub Floor Machine For Chemical Free Floor Finish Stripping, 20x14 1.5hp 1740rpm, Hawk, F98TH2014.
    The TigerHawk2014 utilizes a dry chemical free process to prepare resilient tile flooring to be re-finished. The Dry Strip Process uses the specially engineered Surface Preparation Pads SPP Maroon 14x20 rectangular pads by 3M or ETC and easily removes surface finish in preparation for recoating. It does not remove the finish below the surface thereby saving the first two coats of recoating finish. Saves time and finish costs.
    TigerHawk2014 "vibrates" back and forth about 1/4 inch at a high speed. If this were a round buffer rotating it would have to rotate more than 1,700 rpms - which would throw wet stuff on the wall! Not Raptor2014, the high speed "vibration" removes the finish without splashing! High Speed coupled with the specially engineered Surface Preparation Pads SPP Maroon 14x20 rectangular pads by 3M or ETC, easily removes finish in preparation for recoating!
    The TigerHawk advantage is in its rectangular design. It allows the operator to get in the corners efficiently without getting on their hands and knees. You can not do this with a conventional unit. Furthermore, learning to operate the TigerHawk can be done in minutes. Meets GS42 Guidelines.
    The TigerHawk2014 revolutionary rectangular, floating head design allows the operator to easily maneuver the unit with less fatigue than the normal oscillating units available on todays market. It also enables access to corners while standing, unlike conventional floor machines.
    The TigerHawk Series, using a green process, has the ability to remove several layers of floor finish without water or chemicals. If the operator chooses to use a more conventional approach, the amount of water and chemicals can be reduced. This makes the process inherently safer for the operator and all personnel. This unit is also excellent for sanding, scrubbing, and light polishing. Learning to operate the TigerHawk can be done in a matter of minutes.
    Due to the fact that the process is completed dry, in most cases, all that is required is a dry vacuum to clean up the dust.